Cyanoacrylates are a kind of adhesive that are widely known as super glue or hot stuff. They are the fastest curing of all types of adhesives. They are also waterproof and once they begin to cure, they continue to fully cure on their own, thus they are popularly referred to as a one-part self-cross linked adhesive. In terms of application, only the smallest amount required to bond the parts. Normally, a drop can cover a square inch but using cyanoacrylate on porous substrates like wood will need more of it. So, look for a thick formulation when bonding very absorbent wood.
Additionally, applying the adhesive on acidic surfaces such as oak and mahogany would lead to slower curing time. This is where the assistance of adhesive accelerator would help so that you don’t have to wait much longer. You might be wondering why there is a need to use the accelerator, as cyanoacrylate is well-known for fast curing time. Well, the application of an adhesive accelerator does not only hasten the curing process but it also produces a better bond. You can either wipe or spray the accelerator on one side of the part before you apply the adhesive on the other side.
Finally, the adhesive accelerator is available in two major types namely, flammable and non-flammable. When applying a flammable accelerator, you need to wait for about a minute first before you join the parts. Doing it sooner than necessary will make the adhesive appear in white colour. On the other hand, if you are using a non-flammable accelerator, there is no need to wait that long and you can proceed as you would do without utilizing the adhesive accelerator. If you want to have the best pairing of instant adhesive and accelerator, we provide a complete fast acting and the most efficient solution for you.
Comments